Photograph most likely depicts a locomotive at the Crown Zellerbach Museum in Ladysmith.
Photograph depicts a compressed air operated locomotive frame that had unequal sized cylinders (high and low pressure) and was believed to have come from the Canmore coal mines.
Photograph depicts a compressed air locomotive frame owned by Mr. Shane Sherman. It was believed to have come from the Canmore coal mines.
Photograph depicts a locomotive at the Crown Zellerbach Museum in Ladysmith.
Photograph depicts a locomotive at the Crown Zellerbach Museum in Ladysmith.
Photograph depicts a locomotive at the Crown Zellerbach Museum in Ladysmith.
Photograph depicts a 2-6-6-2 Bladwin locomotive at the Rayonier Railroad camp, north of Hoquiam in Washington. It is on the scrapping line 200 yards from the engine house. It was built in 1934, and possibly numbered 38. The weight is 146 1/2 tons with 59, 600 lb. tractive effort.
Photograph depicts #120 2-6-6-2 Baldwin locomotive at the Rayonier Railroad camp, north of Hoquiam in Washington. It is on the scrapping line, 200 yards from the engine house. It was built in 1936, weighs 186 1/2 tons, and has 59, 600 lbs. of tractive effort. Probably locomotive #38 behind her.
Photograph depicts a 22 ton Lima Shay locomotive, built in 1910 and with a tractive effort of 10, 700 lbs. It is in Promised Land Park on the Olympic Peninsula in Washington State.
Photograph depicts a locomotive on display at Pioneer Park & Museum at Totem Lake, 3 miles north of Yahk and 30 miles east of Creston on Route #3895.
Photograph depicts locomotive #25 at the Cowichan Valley Forest Museum. It was first used in building the C.N.R. in B.C. and/or western Alberta. The gauge is 3' and it is believed it was built to this gauge. The drive is Elmer Blackstaff, the chief mechanic at the museum.
Photograph depicts locomotive #25 at the Cowichan Valley Forest Museum. It was built by Vulcan in 1910. It has a 0-4-0 saddle tank to which has been added a tender. Its length is 21'8", width 7'6", and height 9'8". It has a wheel diameter of 29" and a wheel base of 60". Its cylinders are 10"x18". It has a boiler pressure of 150 lbs. and a water capacity of 400 gallons. It weighs 36, 000 lbs. The driver is Elmer Blackstaff, RR4 Duncan.
Photograph depicts locomotive #25 at the Cowichan Valley Forest Museum. It was first used in building the C.N.R. in B.C. and/or western Alberta. The gauge is 3' and it is believed it was built to this gauge. The drive is Elmer Blackstaff, the chief mechanic at the museum.
Photograph depicts locomotive #24 "Susie" at the Cowichan Valley Forest Museum. It was built by Vulcan in 1894 and has a 0-4-0 saddle tank. The length is 17'16", width 6', and the height 8'. The wheel diameter is 29" and the wheelbase is 52". The cylinders are 9"x14". It has a boiler pressure of 125lbs and a water capacity of 300 gallons,. The weight is 24,000 lbs.
Photograph depicts locomotive #24 "Susie" at the Cowichan Valley Forest Museum. It has a 3' gauge. The last known owner before acquisition by G. Wellburn was the Elk River Collieries Ltd.
Photograph depicts a loading spur on the B.C. Electric Railway at Jackman St. (or nearby), 10 miles east of Langley. The view is looking east.
Photograph taken on the CPR branch from Vernon to Lumby. Depicts loading poles at Gorman Bros Ltd.
Photograph depicts loading coal at Buckley Bay. Coal is from Tsable Mine belonging to the Comox Colliery Co. The view is looking north.
Photograph depicts the Lions Gate (suspension) Bridge.
Photograph depicts a line of cabooses on the caboose track at Revelstoke. There are rumours that the vehicles are to become obsolete by replacing them with a monitoring device attached to the last car of a train.
Photograph depicts a car crossing the Lillooet Suspension Bridge (also known as the Lillooet Old Bridge) over the Fraser River.
Photograph depicts the last spike at Craigellachie, 15 miles northeast of Sicamous, looking southwest.
Photograph depicts "Landing Craft #10," of the B.C. Provincial Forestry Service.
Photograph depicts Lake Cowichan. Trackage that is unconnected is visible in the foreground. Depot itself is a house and a rail museum combined. It was closed at the same time as the Honeymoon Bay mill. Permission was given to close the 18 mile brand line on November 13, 1984. Track lifting commenced on November 20, 1984.
Photograph depicts disused cars on the CPR spur just north of the crossing between the Esquimalt & Nanaimo Railway and Comox Logging and Railway Company (Division of Crown Zellerbach Canada Ltd.)
Photograph depicts the Ladysmith diamond crossing, looking north from the highway. Esquimalt & Nanaimo Railway is visible on the right and in the centre. On the left are the Comox Logging and Railway Company lines. Strings of disused log cars are on the centre tracks and are owned by CPR.
Photograph depicts the crossing between the Esquimalt & Nanaimo Railway (the camera is facing these tracks) and Comox Logging and Railway Company. The guard tower was manned at 7:00 p.m. and had its roof recently reshingled. It faces southward.
Photograph depicts disused log cars standing on spurs immediately north of the crossing between Esquimalt & Nanaimo Railway and Comox Logging and Railway Company. Both track cars are owned by CPR. Note: protection signals are located on the right. The camera is aimed towards the north.
Photograph depicts the a sign about 200 yards away from depot aadjacent to the Island highway. It was probably erected within the last 9 months as a result of the Canadian Transport Commission's investigation of the Esquimalt & Nanaimo Railway in late 1970. Amongst the other structures there is a lack of sign posting, dirty and unkept stations, and active discouragement of passenger traffic.
Photograph taken looking east, towards the depot and town of Princeton. Behind the yard lay the beginnings of the former Copper Canyon branch.
Photograph depicts abandoned KVR track. The depot was located just behind the camera.
Photograph depicts the west yards of the KVR.
Photograph depicts a spur that led off on the norst side of the main line between Princeton and Brookmere. The last train seen here was in May, 1989.
Photograph depicts KVR track in Princeton.
Photograph taken in the KVR yard area where there was a ballon in the place of a turning wye.
Photograph depicts details of a switch stand.
Photograph taken looking west towards the depot in Princeton on mile 70.5.
Photograph depicts an open space where former yards of the KVR were located. Visible is a 2 stall engine shed, a turning ballon (in place of a wye), and the connection with the 14 long Copper Mountain Bracnch which conveyed copper concentrate and closed in 1957. Just out of view, on the right, was the Princeton Tunnel built by the GNR in 1910.
Photograph depicts a train at the KVR Museum in Summerland.
Photograph depicts a train, labelled "Mayo Lumber," at the KVR Museum in Summerland.
Photograph depicts a locomotive car at the KVR Museum in Summerland.
Photograph depicts a train at the KVR Museum in Summerland.
Photograph depicts a train at the KVR Museum in Summerland.
Photograph depicts a train at the KVR Museum in Summerland.
Photograph depicts a train at the KVR Museum in Summerland.
Photograph depicts a train and two locomotive cars at the KVR Museum in Summerland.
Photograph depicts a train at the KVR Museum in Summerland.
Photograph depicts a train at the KVR Museum in Summerland.
Photograph depicts the inspection party at the end of their trip at the south end of the Klo Creek crossing. This is located at mile 86.55 on the Kettle Valley Railway in Myra Canyon, and is about 2.75 miles from Myra depot.
Photograph depicts a car (at the left) which is an office and on display. The car on the right was operating equipment. Photograph taken at the KVR Historical Society headquarters.